Установка рестайлинговой приборки
FAQ по замене панели приборов
Эволюция комбинаций приборов на FF2
Эволюция комбинаций приборов на FF2
Universe
18 October 2011
Здравствуйте. Мне нужна ваша помощь здесь. Я установил рестайлинг HEC с большим экраном. Все прекрасно работает, за исключением топлива с низким содержанием Варинг (желтый индикатор) Wich включена в 95 км вместо 80 км! Что не настроен правильно?
DembeL
10 November 2013mobile
haralabosg
У меня ща также срабатывает в промежутке от 100 до 90, ранше стабильно на 80, 40 и 20, от прошивки видимо зависит.
У меня ща также срабатывает в промежутке от 100 до 90, ранше стабильно на 80, 40 и 20, от прошивки видимо зависит.
-sav-
10 November 2013
haralabosg
This is normal, it can catch fire as at 95 and at 40 kilometers before refueling,,,, here they are, these restyled panel!,
If I understand you correctly?, And the temperature of the engine has nothing to do with,
Good luck
This is normal, it can catch fire as at 95 and at 40 kilometers before refueling,,,, here they are, these restyled panel!,
If I understand you correctly?, And the temperature of the engine has nothing to do with,
Good luck
DembeL
10 November 2013mobile
haralabosg
вроде как в зависимости от среднего расхода он будет когда на 100 пищять, когда на 80.
вроде как в зависимости от среднего расхода он будет когда на 100 пищять, когда на 80.
-sav-
10 November 2013
haralabosg
ZA -
It has the correct firmware
ZA -
It has the correct firmware
ZaQik
14 November 2013
if you set OLD KVM SYSTEM in IPC, you do not need keys programmed
(keys are saved in PCM and KVM, not in IPC)
if you cannot start your car, what error is on display? or DTC from KVM and IPC?
(keys are saved in PCM and KVM, not in IPC)
if you cannot start your car, what error is on display? or DTC from KVM and IPC?
ZaQik: |
| if you set OLD KVM SYSTEM in IPC, you do not need keys programmed (keys are saved in PCM and KVM, not in IPC) if you cannot start your car, what error is on display? or DTC from KVM and IPC? |
I tryed like that but the car dont want to start: I was in service . IPC are from 1.6 tdci to 1.8 tdci
The IDSsaid that it's impossible to "Add" IPC to Vehicle .Wrong code finis or like that im not sure.
The Car also dont want to add keyfree to start the auto
ZaQik
14 November 2013
erniio
There are not differences between IPC 1.6 tdci and 1.8 tdci.
Make printscreen from HEC-Configuration-Page_1 and from HEC-Configuration-Page_2 (both with old IPC). Change IPC. Set VIN code and write it. Set HEC-Configuration-Page_1 as printscreen and write it. Set HEC-Configuration-Page_2 plus check "HEC Level 2/3", Trip computer and Main menu plus select OLD KVM SYSTEM. Write it.
what now?
some errors on display?
some DTC in KVM? (select KVM modul and click on button Clear DTC, then try start your car and then click on button Read DTC)
There are not differences between IPC 1.6 tdci and 1.8 tdci.
Make printscreen from HEC-Configuration-Page_1 and from HEC-Configuration-Page_2 (both with old IPC). Change IPC. Set VIN code and write it. Set HEC-Configuration-Page_1 as printscreen and write it. Set HEC-Configuration-Page_2 plus check "HEC Level 2/3", Trip computer and Main menu plus select OLD KVM SYSTEM. Write it.
what now?
some errors on display?
some DTC in KVM? (select KVM modul and click on button Clear DTC, then try start your car and then click on button Read DTC)
ZaQik
17 November 2013
erniio
on HEC-Configuration-Page_1 is select-menu about ENGINE ... what is selected? ENGINE DV/DW (1.6 TDCi) or ENGINE LYNX (1.8 TDCi)?
| цитата: |
| When i try to "Add" IPC to PCM the ids says "incorrect part number " |
on HEC-Configuration-Page_1 is select-menu about ENGINE ... what is selected? ENGINE DV/DW (1.6 TDCi) or ENGINE LYNX (1.8 TDCi)?
ZaQik: |
| erniio on HEC-Configuration-Page_1 is select-menu about ENGINE ... what is selected? ENGINE DV/DW (1.6 TDCi) or ENGINE LYNX (1.8 TDCi)? |
Lynx 1.8tdci
I added the keys into IPC . but not ipc to pcm
ZaQik
17 November 2013
erniio
you cannot add keys, because keys are in PCM and KVM
do you have IDS? try: install new programmabe modul and select IPC (old IPC must be in car before action)
you cannot add keys, because keys are in PCM and KVM
do you have IDS? try: install new programmabe modul and select IPC (old IPC must be in car before action)
ZaQik
17 November 2013
erniio
1. old IPC is in car
2. in IDS: install new programmable modul
3. IDS says "replace IPC"
4. IDS configures new IPC
1. old IPC is in car
2. in IDS: install new programmable modul
3. IDS says "replace IPC"
4. IDS configures new IPC
ZaQik: |
| erniio 1. old IPC is in car 2. in IDS: install new programmable modul 3. IDS says "replace IPC" 4. IDS configures new IPC |
So i did it last time , and the IDS says "NO" invalid part number or something like this
ZaQik
17 November 2013
erniio
OK, so:
1. new IPC is in car
2. IPC is configured via ELMConfig (VIN + all parameters + keyless: SSCD)
3. in IDS: install new programmable modul
4. IDS says "replace IPC" ... you do not replace it
and now?
(if it will not work, try set keyless to SSB)
OK, so:
1. new IPC is in car
2. IPC is configured via ELMConfig (VIN + all parameters + keyless: SSCD)
3. in IDS: install new programmable modul
4. IDS says "replace IPC" ... you do not replace it
and now?
(if it will not work, try set keyless to SSB)
-FEDERAL-
22 November 2013
Всем привет ребята кто может переделать дизельные приборки на бензан ст/рс
furgon
24 November 2013
newbotanik
Питер - без проблем
С Киевом сложнее 
Питер - без проблем
С Киевом сложнее 
IVN3003
24 November 2013
Вот наконец установил приборку от rs.
Вид сразу изменился)))
Вид сразу изменился)))
DembeL
25 November 2013mobile
IVN3003
ништяк, преображение торпеды сразу радует глаз.
ништяк, преображение торпеды сразу радует глаз.
furgon
25 November 2013
mandalore105
В разделе продам -есть помойму сейчас в продаже
Приборная доска, рестайл, большой дисплей (сообщение #14844342)
В разделе продам -есть помойму сейчас в продаже
Приборная доска, рестайл, большой дисплей (сообщение #14844342)
Dark mode
© 2024 ffclub.ru − Ford vehicles owners club