Touchscreen SatNav Self Diagnostics
NOTE:It is necessary to carry out part of the system diagnosis outside the workshop. Make sure that there are no large buildings/obstructions or metal objects in the immediate vicinity.
1. Turn the ignition switch to position II.
2. To access the diagnostic menu, PRESS and HOLD the MENU button for approximately 10 seconds, until a audible beep is heard and the screen changes to the personal identification number (PIN) number display.
3. ENTER the following PIN number on the display to access the additional diagnostic menus: 6414.
4. PRESS the ENTER button on the display screen to confirm PIN number input.
The display screen will show the following sub-menu(s):
General Info Manual Check Display Info Navigation Info S/W Update Self Check
5. TOUCH the display screen to select the required sub-menu.
Additional menus can be accessed from the following sub-menus:
General Info
This sub-menu contains vehicle configuration information.
The additional menus from this sub-menu are as follows:
Audio Diagnostics - Allows audio unit diagnosis Manual Check
This sub-menu allows access to key test screens.
The additional menus from this sub-menu are as follows:
DIAGNOSTIC ERROR CODES - This will display a list of all set diagnostic trouble codes (DTC)s. NAV RGB TEST - Display color confirmation. TOUCH SCREEN CHECK - Allows the display touch calibration. DISPLAY HARDKEY CHECK - On screens icons are illuminated when a hard key is pressed.
Display Info
This sub-menu contains software version information for the display.
Navigation Info
This sub-menu allows access to the global positioning system (GPS) information screens.
The additional menus from this sub-menu are as follows:
RESET POSITION - Allows the vehicle position to be reset to the current map DVD default country (Belgium). VEHICLE/GYRO SIGNALS - Displays the vehicle direction, speed and distance. Also displays the gyro information. GPS INFORMATION - Displays the GPS satellites signals to the navigation system and their position.
S/W Update DO NOT USE THIS
This sub-menu allows the update of the navigation system DVD unit software from a separate DVD ROM sent when an update is required and is available. This cannot be done from the normal navigation system DVD ROM.
Self-Check
This sub-menu displays error codes detected after an internal self-diagnostic check of the navigation DVD unit.
6. Turn the ignition switch to position 0 to exit the diagnostic menu.
x