[EN] Kuga Mk2 (2012) quick help

S su-ch-kuga:

Hello Friends thank you for become one of your members. Until last year I drove a Kuga MK 1 with many modifications: now I have a MK2 and would also apply some mods. I bought a UCDS adapter with full license. I was amazed what can be done with this tool. Can you help me with getting the climate control in the Sync3 Scree? I have seen that the US Escapoe have that but why don't we? If you could please help. Thank you.

https://wiki.ucdsys.ru/doku.php?id=dc_sync3:start

zbugz:

https://wiki.ucdsys.ru/doku.php?id=dc_sync3:start

In APIM SYNC 3:

3: Config Block DE00 - DE00
Climate Control Type - Automatic
3: Config Block DE03 - DE03
Climate - Enable Climate Control Repeater for Dual Climate Control

Thank you friends,
when that is all

dont I have to restart the AIIPM module?
I heard that would be necessary.

S su-ch-kuga:

Thank you friends, when that is all dont I have to restart the AIIPM module? I heard that would be necessary.

You can reboot, I don't remember

Activating Autolock.
I heard about 2 versions on how to activate autolock

one is via AS-build
As Built Editor, Read vom BCM, Save to File, change line 32 to Locking by Speed, write to BCM, write to Backup IPC

the other much shorter an easier
IPC 4, then on the right side line 14 activate and done

Which one is correct?
and did I miss a step ?

on the Mondeo my nighbor has it is possible to activate an acoustic signal when locking the door.
Is this feature also available for the Kuga MK2?

in my kuga I can chose whether or not the system should war me when I exceed the speed limit.
This happens as a flshing speed limit sign.
the Mondeo on the other side also has the option for an acoustic warning.
is this available for the Kuga 2017-?

цитата:

As Built Editor, Read vom BCM, Save to File, change line 32 to Locking by Speed, write to BCM, write to Backup IPC

This

Hello,

I'd like to change / setup time when the puddle light are switch ON after closing door
Current status:
1. I unlock the car - puddle light are ON
2. I open door puddle lights are ON
3. I close door puddle light switch OFF imediately -> it is possible to set up cca 5 or 10 seconds that puddle lights will be ON

Cargo Light switch ON after car unlocking.
I want to have the cargo light ON only when the trunk door is opened

Thank you!

FLA
Need change in asbulild where cargo light. Ect.. Center, door, all dooor and more

Hello
I have such a problem in Ford Kuga 2.0 gtdi year 2014
Starter - ok
relay - ok
switching on the relay from the ECU ok (starter turns)
the clutch pedal works for max 75% (I don't know if it shouldn't be 100%)
The ECU sees the START signal from BCMi but does not turn on the relay
What else does turning on the starter depend on?

when you connect the relay it will light up and work for ok

What bites him?
It shows me the temperature in 104 Ccius car (maybe because of it)

Tomdan
Has the car any extra security systems?

there are no alarm systems

Tomdan
In this way I think where are some problems with key.

I have added the key again and it is the same

and in parmetrach clutch what value it has
I have 75%

Hello, would you please let me know what is the PN and where is the location of cam shaft sensor on Kuga 2.0 tdci 2014? Picture will be best one thanky you very much

FLA
I can only help you with that.
FINIS: 1837835
Eng. PN: 9M5Q-12K073-AB

Balsoje spasiba! Just to be sure here is my VIN WF0AXXWPMAES87702

Hello
I have such a problem in Ford Kuga 2.0 gtdi year 2014
Starter - ok
relay - ok
switching on the relay from the ECU ok (starter turns)
the clutch pedal works for max 75% (I don't know if it shouldn't be 100%)
The ECU sees the START signal from BCMi but does not turn on the relay
What else does turning on the starter depend on?

when you connect the relay it will light up and work for ok

What bites him?
It shows me the temperature in 104 Ccius car (maybe because of it)
перевод
Привет
У меня такая проблема в Ford Kuga 2.0 gtdi 2014 года
Стартер - хорошо
реле - хорошо
включение реле от ЭБУ в норме (стартер поворачивает)
педаль сцепления работает максимум на 75% (не знаю, не должно ли она быть на 100%)
ECU видит сигнал START от BCMi, но не включает реле
От чего еще зависит включение стартера?

при подключении реле оно загорается и работает нормально

Что его кусает? Это ошибка ?
Показывает температуру в машине 104 Ccius (возможно из-за этого)

su-ch-kuga Are you asking about the icon to control the A/C from the sync 3 touchpad?