Ask for any help about Ford Focus Mk3 (2011) in English.This topic is mainly for people who can't speak Russian - you can ask for any help and we will try to help you.
Also check our most popular topic for international visitors: Ford Sync 3 - multimedia and navigation (RU) - it's in Russian but you may use Google Translate to post, it's ok there
ter
28 May 2005
[EN] Focus Mk3 (2011) quick help
its from american (i think) focus photo, calibration TSB 13-06-27.
i got entire post from focus fanatics forum. i can paste link for topic (but i think its forbidden)
New features:
-Additional fifth screen within each Trip menu, which shows the four other screens' information in a four-quadrant setup
-Odometer can be switched between miles and kilometers
-Resetting the screens is slightly faster
-All screens can be reset at once if done from the four-quadrant screen
-"Engine On" warning added, for if the car is running and driver's door is open
now i search a way for update my screen - i need second trip computer...
netter
EU and US instrument cluster panel have different EEPROM.
This means that US software is not suitable for EU ICP modules.
Another way is to update your instrument cluster to facelift version. After this you will get 2 trip computers, dark theme but OEM parkpilot will lose its sounds. Moreover light dimming will be available from ICP only (not from light switch).
Universe thanks for reply,
so
1. i will lose "beep" sounds when i ride back?
2. you mean interior light dimming or gauages light ?
3. so how i can made update ?
thanks for holep again
netterFor a future...
цитата: |
1. i will lose "beep" sounds when i ride back? |
Yes
цитата: |
2. you mean interior light dimming or gauages light ? |
gauges light
цитата: |
3. so how i can made update ? |
PLEASE BEWARE to save your current STATE and files!!!For facelift software:
SBL - F1ET-14C025-BB.vbf
Main SW F1ET-14C026-ABJ
Second SW F1ET-14C026-ACH (we call it pictures
)
F1ET-14C026-AFG (not ST Calibration)
OR F1ET-14C026-ASG (ST Calibration)
Signal calibration F1ET-14C318-AC
Universethank you
sience motorcraft not working ... its there another place where i can download these files ?
Universe
Thanks for email.
in what order to i have to upload files?
1. SBL - F1ET-14C025-BB.vbf
2. Main SW F1ET-14C026-ABJ
3, Second SW F1ET-14C026-ACH (we call it pictures )
4. F1ET-14C026-AFG (not ST Calibration) OR F1ET-14C026-ASG (ST Calibration)
5.Signal calibration F1ET-14C318-AC
?
its safe to use foCCCus fot this operation ?
netter
in order i`ve written
i operate with another adapter so i can`t help you with foCCCus SUPPORT
Universe
thanks for your time and sharing your professional knowledge.
I need 15 focus ipc rom (4 files) thank you very much!!!
my email--leonada2008@163.com
hi everyone,
i have a strange thing with FoCCCus, in the original situation the fuel economy was in KM/L, after reading the BCM and enabling the reverse camera wrote the new config to the BCM and IPC. So the camera is working but fuel consumption is now in L/100KM, what caused this change and how can i get it back to KM/L ?
Thanks for the help !!
Silver_Age:
|
какая прелесть, получить отображение машинки почти не напрягаясь
|
Hi, is the OPS graph available for Ford Focus 3? I've installed the SYNC2 and front and rear radars.
Thanks.
gonghao
he's got a Kuga. The focus is not yet possible.
Slivsy
I wonder is it related to BCM? Newer BCM starts with F1ET integrates the features which do implements in IMPB previously, but I don't know is it related to other modules like PAM?
Thank you for your reply.
gonghao
That there would be the visualization of the Parking areas for the Ford focus 3 you need to change PAM to restyling. Replacement of PAM leads to the replacement BCM (F1FT).
Devillous
14 May 2016
Hi
I want to deactivate Auto Start Stop with FOCCCUS in my ST MK3 FL 2015...
Need some help.
I know it is 222 in Focccus, but afterwards i get an error for all Assistents - Acite City Stop, BLIS, ABS, Airbag and so on...
Initializing the ECU does not help... Deleting all errors does not help as well...
Any ideas?
if you need my VIN - WF06XXGCC6FE26222 - i change parameter 222, Initialize ABS, delete all DTC but the car is still going crazy...
Also, I have Navigation displaced in between speedo and rpm meter - any idea how to activate that?
Devillous
As far as I know, FoCCCus is not fully ready for 2015 (FL) Focus yet. So, it's not something unexpected given the current readiness of the software. In principle, just reading the Asbuilt from BCMi is enough to produce errors. I have a couple of friends with similar issues.
I may be wrong, but let's see if others will share some experiences.
I would recommend to revert back to your default Asbuilt and clear any DTC. Otherwise, you can pay a visit to your dealership and request to clear DTCs.
Meanwhile, you can deactivate Auto Start/Stop with the button inside the vehicle. Of couse, you have to remember to do this every time you start the engine. Alternatively, you can look for any fuse (if any) exclusive to Auto Start/Stop system (in preFL MK3 I think there is a fuse for Auto Start/Stop switch, not the system itself and combined with ignition switch).
I always remember about the button, but this is not case with my wife
semiho
8 June 2016
Извините за мой плохой Russain. Я использую Google Translate.
У меня есть базовый радио с двумя строчный дисплей. Я хочу поменять экран 4,2-дюймовый дисплей без синхронизации. Мой запас радио имеет USB-порт. Как я могу заставить его работать с 4,2-дюймовым дисплеем?
JustHunteR
8 June 2016
semiho
You need install only ICP(buttons) and display, without Radio AHU (in your foto). And you need change configuration about ICP and display.
P.S. Sorry my bad english)
И если по-русски: менять надо только экран и кнопки, аудиоблок (тот что на фото) менять не надо, пусть остается твой старый
JustHunteR:
|
semiho You need install only ICP(buttons) and display, without Radio AHU (in your foto). And you need change configuration about ICP and display.
P.S. Sorry my bad english)
И если по-русски: менять надо только экран и кнопки, аудиоблок (тот что на фото) менять не надо, пусть остается твой старый |
Thank you for your reply.
I don't know the rules very well so I'm gonna use the Translate.
Моя текущая эта конфигурация ниже.
#112 Entertainment - Low level CD and AM/FM radio
#113 Voice Control - Without voice control
#154 Accessory USB - With USB unit and ipod function
#157 Bluetooth HF - Without Bluetooth hands-free
#172 Touchscreen - With display no touchscreen colour TFT - MFD 4
Мой автомобиль оленья кожа имеет BVC модуль и мой экран является bm5t-18b955-Cg. Все, что я могу сделать?
JustHunteR
9 June 2016
semiho
Do you have allready installed novero? Or sync? Or you are going to install it? Do you have your old display bm5t or new 4.2 bm5t?? And do you know, your
And please, write in english, google translater does a very bad translation
JustHunteRI don't have bluetooth module. I will install SYNC module and still looking for it. My two line display is F1FT, my car is FF3 Restyle.
BM5T works very well. I'm trying to make USB work till I found the SYNC module.
semiho
You can install sync in your car, but i am not sure about correct working display bm5t in your system. Usb will be connect to the sync module
semiho
But you can change software of 4.2 display from bm5t to f1ft
JustHunteR
Thanks. Some of the functions are not working well such as radio tune button. Software will solve this I guess. If install the SYNC module, I have to change the radio unite. Isn't it possible to make USB work without SYNC? What configuration?
semiho
You may have usb or with your old radio unit, or with sync module. What configuration do you need? For sync module? Display 4.2? What buttons?
semiho
12 June 2016
JustHunteR
I want to use my old radio unit (with usb port), basic buttons and the 4.2 display together. What is the correct focccus configuration to use USB? Is there any other thing I should do?
semiho
You need configure "#172 Touchscreen - With display no touchscreen colour TFT - MFD 4" only after install display 4.2 and may be change display software to f1ft. But if display will work correct in bm5t you don`t need change display software