[EN] Focus Mk3 (2011) quick help

Universe
If I use sd reader, can work sistem?

I don’t think so.

cavallo76
pin 7 isn`t used. it should be empty.

BTW I have one hub that works with F4 sd card only. It doesn`t want to work with newer cards. Mistique

Universe
Same is mine?
On My hub doesn't work usb and sd. If I put normal mini usb - female usb cable and I connect USB pendrive, it work (on black and Grey plug) !

cavallo76
defective part

Universe
On focus mk3.5 which hub there is for sync 2?

cavallo76
there was one with 2 usb / 1 sd / aux

but it has different socket

Universe
Is possible that hub is disable by Direct programming?
This sync is American whit dps. When I reprogram it, I took bit from European sync

I`m not sure. I can only state that hub is not a module to be programmed. It is passive. Just a electric part without CAN brains

Universe
We have some problem with this installation of sync 2.
Any bit we put on APIM with forscan, auto parking, park assist and parking sensors (on sync 2) don't work.
Can you help we on configuration?

cavallo76
email me VIN and APIM`s configuration file

Anyone have link for Etis cracked offline?

hello I installed sync 3 soon and I got the problem with parking, it does not work and no sound at parking sensors, the body series is this WF06XXGCC6FK23868. thank you.

which parameter needs to be changed to work, thank yo

First, change these parameters in Configureren as-built.

#123 - Aux. input = 01 without
#154 - accessory usb input = 01 without
#157 - Bluetooth handsfree = 01 without
#172 - Front display = 09 touchscreen DM-8
#214 - ICP = 09 Non branded mini-ICP

If in this case the parking sensor does not work, you must change the parameters in the sync itself. However, you will need the Russian UCDS cable.

PRP: his car had SYNC2 - your advice is useless

Dextervio: did you change parameters in SYNC3?

спасибо за ответ, который я решил с парковкой, теперь у меня есть другая проблема, я купил cdplayer от kuga, cv4t-19c107-nj, и я установил его, чтобы сфокусироваться, но у меня нет звука на датчиках парковки, вы можете помочь мне с конфигурацией cdpayerului.in UCDS выглядит так. спасибо.

Universe
Do you have electric scheme of kuga mk1?

Hi,

I own a FOCUS 3 RS. If I try to read BCM or PCM, I get this message -can't enter security into ECU-

Is there anybody who can help?

Hi. I have 2014 ford focus. i updated to sync 3 and it work fine. i have 1 question hope you guy can help me. i want to change my IPC to dark-blue themes like this one. How can i do that. Can it be done with forscan or i need to use UCDS. Thank

With Forscan or Focccus, change this parameter and you will have a dark theme.

#172 - Front display = 09 touchscreen DM-8

By the way, I recommend changing the rest if you are not.

#123 - Aux. input = 01 without
#154 - accessory usb input = 01 without
#157 - Bluetooth handsfree = 01 without
#172 - Front display = 09 touchscreen DM-8
#214 - ICP = 09 Non branded mini-ICP

Thank you so much. i have 1 more question. mine is 2014 ford focus. my PAM module dont have as-built and only have auto parallel parking. If i replace my PAM module with 2017 PAM can i use Perpendicular parking.
Thank

It will not work. For parallel parking, you need six rear bumper sensors. Probably you will have to change the BCM module as well.
Better not try to do this experiment.

Hi!
Guys - is it possible to install steering whell from FOCUS mk4 in Focsum MK3?
Plug&Play or not ?

groauto
Focccus is not good for focus 2014 - 18

Can I mount internal mirror with automatic dimmer on focus 2017?
Anyone have electrical scheme of this mirror? It has 3 pin

Here is the diagram of the interior mirror. Ford Focus MK3

Can somebody help me? ACM GJ5T-18C815-NN have DAB and TMC?

DAB - yes