[EN] Focus Mk3 (2011) quick help

JustHunteR
I already done that, but USB doesn't work.

semiho
try to change #154 to "07 - without usb unit"

semiho
and if after this usb will not work you will need to change display software

JustHunteR
I know I'm beeing boring but It's already set to that. I never changed it.
Thanks for your time.

semiho
what programm do you use? foCCCus? ADS? UCDS?

JustHunteR
Focccus. mk3 has aux button, mine has mode button. Another thing, nothing happened when I plug or unplug the USB stick. Should I see a alert or info?

semiho
yes, alert will be "usb device connected"

I will translate ours correspondence to russian for the other members.

Да, должен писать "подключено юсб устройство"

Hi,
My name is muzaffer From TURKEY,
My car is Ford Focus 2015 TDCI Titanium europe version.I was install one week ago.It is operating normally until they enter the system authentication.After receiving this error DTC 3002:62 AF after throwing the fault code on the screen.I was install used module.I need calibration file F1FT-14D368-AB.vbf and F1FT-14D368-BB.vbf for reflash and change VIN#. Please help me.

A arcomp:

F1FT-14D368-AB.vbf

Why did you decide you need to reflash the BLIS modules?

hello,
Thank you for your replay,

Modules of different firmware.
SOD-L firmware is F1FT-14D368-AB.vbf,
SOD-R firmware is F1FT-14D368-BB.vbf

DTC U3002:62 AF on the SOD-R and SOD-L modules.

U3002 - Generic
Type Network - Control Module/Power Distribution - ISO/SAE Reserved Description

Vehicle Identification Number

JustHunteR
I tried AM5T-18B955-CE still no luck wit the USB. It may be removed from a car with Sync module. I dunno. One my friend's 2014 C-Max has am5t screen with sync.

Also my friend bought a complete set of restyle 4.2 with sync module. Everything works fine but car didn't regocnize sync. In focccus FCDIM show donor car's VIN.

Hi!

I have focus 2015 petrol. I swapped my speedometer to the f1et-10849-bjh. Set the kilometer to the correct value. Everything works perfect for now. However car generating DTC's. How can I avoid that?

semiho
What exactly DTSs generates your car?

Thx for this topic, I come form china, my car is the basic collocation (the lowest/ simplest / cheapest version) in china, named as "2012 forcus 1.6mt suitable version", the odometer has a button (which can reset the tripmeter by holding on for a while ) between the oil meter and the thermometer.

Now I've heared that my odometer can use the 15 focus english version firmware , which are more functional, such as digital speed display, driving counting, double traveling/driving computer configurations.

I want to try to install the new firmeware , but I can't find the website/urls to download this firmware.
The motocraftserive web looks like will not provide the firmware downloading services.

So can you provide me a url to download this firmeware ? (suit for the basic odometer, english version , support digital speed display...etc.)

By the way , can I install the new firmeware over my car by the els27 or elm327(ms-can mode)?

Thanks for your replying...My english is not well...whish I've post my quesions clearly.

wowfans
Your English is enough clear for us to understand from the first attempt

An actual URL for FORD software download is located here

btw... You need steering wheel button (OK with arrows) in order to use trip computer.

Universe
Thank you for your prompt reply.
I have already replaced the airbag cover, with multimedia buttons, and cruise / lim buttons.
In order to save money, I refit the right button (OK with arrows circuit board, M with mutimedia control shell ), replaced the SMD RESISTOR on the circuit board with the same value that on the cruise/lim controller , so now the left the button(ok with arrows)is used to control the trip computer settings or switch the displaying information , the right button (the appearance is M with next/previous/vol+/vol- , the circuit board has been changed ) is used to control cruising / lim speed driving, and so I need't to cut the steering wheel to install the cruise/lim controller.
About the odometer , I've bought a new basic odometer which has been installed the firmware F1ET-14C026-AAE, it's a 2012 focus English firmware, everything works ok, the firmware can support the cruise control, speed limiter, and view the mileage information, consumption information, tire pressure detection function...

Now I want to upgrade the firmware to a 2015 focus English firmware, model is F1ET-14C026-AAJ , I'v downloaded it from the site that you provided me , and I also download the other 3 maching documents: F1ET-14C318-AC, F1ET-14C026-AEG, CM5T-14C318-AD.
I'm a novice, only get a elm327 cable (ms-can enabled) , so I want to konw how to install the new firmware ( the 4 files above), and these 4 files form a complete firmware? No more files needed ? If the firm is competed , can I use the focccus 0.8.6 , switch to the "tools" table, use the "upload vbf" function to install the new firmware? or I must by a new els27 cable to replace my elm327 cable ?

My car current status:

Hi!

We tried to install complete SYNC 2 unite to 2015 Focus Hb. System started well however we can't able to work buttons. Wiring was done according to that scheme.

semiho
this scheme has an error. There is not MS-CAN, but MM-CAN

Universe
What is the correct wiring?

semiho
The Front Control Interface Module (in other words - the buttons) has to be connected to MM-CAN
You can take it e.g. from LCD screen or Audio module

Universe
Thanks!

Can you tell exact pin numbers of MM-CAN? Which pins of LCD or ACM should connected to the FCDIM? Or Is It possible to share the correct scheme?

Universe

Hello Universe, One more question.

In my country, "Chang-An Ford"(an local joint venture that produce the ford vehicles) launched a local vehicle model which named "Furuisi". I've download an Furuisi's AB file form motorcraftservice website, it's not a focus mk3's AB file , so I can't use "ford.xtlt.ru/ab/" or "focccus" to edit it .

This AB file did't include the CCC_DATA, only have 2 modules (PCM_MODULE & BCE_MODULE), so it's difficult to analyze the contents.

such as:

<DATA LABEL="PCM 1"><CODE>FFFF</CODE><CODE>FFFF</CODE><CODE>FF0C</CODE></DATA>
...
<DATA LABEL="720-01-01"><CODE>0400</CODE><CODE>0460</CODE><CODE>0091</CODE></DATA>
<DATA LABEL="720-01-02"><CODE>0002</CODE><CODE>123E</CODE><CODE></CODE></DATA>
...
...

So the question is :

Can I use the IDS software to view/edit this AB file ? How?

My ids is a trial version, and I didn't have got a vcm ii/ ucds cables.

Only use completely offline mode (no connect vcm cables, trial version ) to launch the IDS software, how to edit this AB file? Thank you!

Hello,

Anyone knows what can cause error:

P0520 on ST ICM which has been installed to 1.6 EB ?

Universe

Still no progress with the buttons. I don't know what is Mm-can? Do you mean hs? Acm and screen has hs-can as I know. Current wiring is like this. No fcim.

Hello guys. I'm sorry but i don't speack Russian and my English is very bad.
Your forum is the best in the world and I took many information for many upgrade on my focus.
Now i have a problem on new upgrade that i want to do.
I want put Interior roof illuminaton of titanium (led), on my focus (factory is bulbs).
First thing i read electrical scheme and i follow all wires of all light (led and bulb). I see that my car have 4 front 2 rear wires while titanium have 6 front 5 rear. I smount light on roof i add missing wires but between electrical scheme and wires on my car the color of cable are not same.
Then whit multimeter i found all wire.
Now if i plug new light, it work only if i open the doors. If i have doors close light are dead.
What i wrong?

Hi.

It's better to ask here [EN] Focus Mk2 2005 - quick help
Why you think its wrong? The light goes off when doors are closed. Make some pictures of your light connections.

I-CAN = MM-CAN as far as i can see in the schematics !

Hi! Finally I got worked SYNC 1.1. My car '15 Focus. I have rain sensor on windshield but I don't have roof rack for microphone. Don't know where to connect? I read on the forum there is an empty socket for the microphone on the left column. Is this also correct for me? Thanks.

I have this mic.