trzmi3lu

Hello
I need tips on where and what values to set in the APIM configuration for the proper operation of the APA, but in turn, I replaced S2 to S3, threw in most settings (As-Built) from a car with almost the same equipment (VIN WF0AXXWPMAHU29704) (my VIN WF0AXXWPMAGG80822), I was able to solve most of the problems I had during configuration, but one remained and worst ideas ended. 7D0-04-02 when entering the value 7 on the screen I only have perpendicular parking, no choice of parking type, which does not work anyway, and after entering the value 3 (as it was in s2) parallel parking seems to work, but no perpendicular, sensors and sensor sounds work ok. Below I attach pictures of screens.

Auto- Kuga MK2 (2016) Titanium +

Maybe someone had a similar problem and something to advise, I do not use APA in total, but how is this why it does not work.

Thanks in advance

sorry for my English

hello,
My car is Ford Kuga MK2(2016) Titanium+, I upgrade sync 2 to sync 3 and (3.4 19200) in my car, but i have a problem after uploading he configuration from another car VIN (.ab). no sound from the sensors with parking enabled front and rear. Where will I find sound settings ?

ps. sorry for my English ;/
thx